Lihlahisoa
DG2XZS Series Transmitter Pressure For Ente Molding Machine
DG2XZS letoto la khatello ea li-transmitter e etselitsoe mochini oa ho bopa ente, litšepe tsa tšepe, metjhini e etsang tšepe, hape e ka sebelisoa liindastering tse ling tsa ho etsa mechini.Mofuta ona oa transmitter o boetse o sebelisa silicon ea MEMS Bicrystal le sebopeho se kopantsoeng sa 17-4PH ea tšepe e sa hloekang e lekanyang diaphragm, kahoo e netefatsa botsitso ba eona bo phahameng le ho nepahala ho phahameng.Theknoloji ea mantlha ke hore diaphragm ea ho lekanya le sebopeho sa ts'ebetso li sebetsoa ka botlalo ka sesebelisoa sa mochini se nepahetseng.Ka nako e ts'oanang, ka ts'ireletso ea dijithale e etelletseng pele le theknoloji ea matšeliso ea mocheso le khatello, phetoho ea khatello e fetoloa lets'oao la hajoale kapa la voltage.Sehlahisoa se senyenyane ka boholo, se kenngoa habonolo, 'me se sebelisa khetla ea tšepe e sa hloekang ho arola le ho thibela ho bola.Ho feta moo, sehlopha sa eona sa tšireletso ke IP67.
1. Mochini oa ho bopa ka ente, litšepe tsa tšepe, mechine e etsang tšepe.
2. Indasteri ea ho etsa mechine le indasteri ea kaho ea likepe.
3. Theknoloji ea ho lekanya le ho laola.
4. Hydraulics le pneumatics system (Lipompo le li-compressor).
1. Moralo o kopantsoeng oa sebopeho se kopantsoeng habeli, matla a mangata a mangata, khatello e phatlohileng e fetang makhetlo a 5 sekala se felletseng.
2. E loketse khatello ea matla ea mochine o tloaelehileng oa mochini oa ente, khatello e phahameng ea khatello ea khatello, khatello ea khatello ea khatello ea ente ea pedestal inlet.
3. Tšireletso e khutlisetsang morao, tšireletso ea potoloho e khutšoanyane, tšireletso ea surge.
4. Potoloho e kopana le litekanyetso tsa ts'ireletso tsa ka hare 'me ke EMC e tiisitsoeng ka ho hanyetsa ho sisinyeha ho fihlela ho 20g.
5. Mokhatlo oa USA ANSI Pressure Standards liteko o fetisitse tlhahlobo, mme o netefalitse hore palo ea lipotoloho tse felletseng tsa khatello e kholo ho feta limilione tse 10.
| TshebetsoPli-arameter | Regular Measuring Range (Psi): | 3500 | Nako ea Karabo: | <2ms |
| Mefuta e meng ea indasteri (Psi): | 150,250,500,1000,1500,3000, 5000,7500,10000 (Range e ka etsoa ka mokhoa o ikhethileng) | Ho hanyetsana le Vibration: | 20g (10Hz ~ 2kHz) | |
| Khatello e Felletseng: | 200% FS | Impact Resistance: | 100g/11ms | |
| Khatello ea Phahlo: | > 500% FS | Sehlopha sa Tšireletso: | IP67 | |
| Lets'oao la Tlhahiso: | 4 ~ 20mA (lithapo tse peli), 0 ~ 10V (lithapo tse tharo) | Bophelo ba Tšebeletso: | 10 Million Pressure Cycle Loading | |
| Phepelo ea Voltage: | 10 ~ 30V (4 ~ 20mA), 12 ~ 30V (0 ~ 10V) | Mocheso oa polokelo: | -40 ~ 125 ℃ | |
| Load Resistance R: | R (Ω)<(Us-10)/0.02 (4~20mA) R (Ω)>2000 (0~10V) | Mocheso oa ho sebetsa: | -20 ~ 85 ℃ E tloaelehileng -40 ~ 125 ℃ Ho ikhethela | |
| Tšebeliso ea Hona Joale: | E sebetsa hona joale, Max24mA (4 ~ 20mA) Tšebeliso ea Hona Joale <10mA (0 ~ 10V) | Insulation Resistance: | ≥50MΏ (250V DC) | |
| Nepahetse : | 0.5％FSSstandard 0.25％FSOFSO ka boikhethelo | Khokahano ea Ts'ebetso: | Gl/4E, 1/2NPT le tse ling | |
| Hysteresis: | <0.15% FS | Lihokelo tsa Motlakase: | HSM Plug DIN43650A | |
| Nonlinearity : | <0.15‰FS | Tšireletso ea Cable: | Tšireletso ea morao ea polarity le tšireletso ea potoloho e khutšoanyane | |
| Phoso ea Pheta-pheta: | <0.1％FS | Lintho tse Wetted : | 17-4PH | |
| Phello ea Mocheso ho Zero Balance: | 0.25%FS/10℃ | Boitsebiso ba Sekoahelo: | 304 Tšepe e sa hloekang | |
| Phello ea Mocheso ho Kutloelo-bohloko: | 0.25%FS/10℃ | Botsitso ba nako e telele: | <0.1％FS | |
| Hysteresis ea mocheso: | <0.1％FS |
|
